What to do if a paper jam has occurred on the Paper Receiving Tray section of Riso Disc Duplicator?
If a paper jam has occurred on the Paper Receiving Tray section of your Riso Disc Duplicator, remove the jammed paper from the Paper Receiving Tray section. If the error indications persist, press the key.
What to do if a paper jam has occurred on the Paper Feed Tray section of Riso Disc Duplicator?
If a paper jam occurs on the Paper Feed Tray section of your Riso Disc Duplicator, first remove the jammed paper. Then, set the paper again. If the error indications do not disappear, press the key.
How to fix a paper jam in the ADF unit of a Riso Disc Duplicator?
If a paper jam has occurred in the ADF unit (option) of your Riso Disc Duplicator, remove the original jammed in the ADF unit. You can remove it in the document insertion direction by pressing the ADF Original Release Button and pulling out the original. Alternatively, you can open the Stage Cover and remove it in the document output direction by turning the ADF Original Release Dial while pulling out the original.
What to do if a paper jam has occurred around the Print Cylinder of Riso Disc Duplicator?
If a paper jam has occurred around the Print Cylinder(Drum) of your Riso Disc Duplicator: 1) Pull out the Print Cylinder(Drum). 2) If you find jammed paper, remove it.
What to do if a master has not been sent to the Master Disposal Box of Riso Disc Duplicator?
If a master has not been sent to the Master Disposal Box in your Riso Disc Duplicator: 1) Pull out the Print Cylinder(Drum) and remove the master on the cylinder(drum). 2) Set the Print Cylinder(Drum) again. 3) Press the key.
What to do if a master issue has occurred in the master disposal section of Riso Disc Duplicator?
If a master issue has occurred in the master disposal section of your Riso Disc Duplicator: 1) Remove the Master Disposal Box. 2) Stand and push down the Master Release Lever at the inside of the Master Disposal Box.
What to do if a master has not been correctly cut in Riso Disc Duplicator?
If a master has not been correctly cut in your Riso Disc Duplicator: 1) Remove the master roll and close the Master Making Unit Cover. 2) Set the master again.
General| Brand | Riso |
|---|---|
| Model | RZ390UI |
| Category | Disc Duplicator |
| Language | English |
Details instructions for operation and maintenance of the machine.
Explains symbols and remarks used in the manual for clarity.
Notes about functions and illustrations used in the manual.
Identifies and lists all physical parts and components of the machine.
Describes the main control panel and its keys/indicators.
Details the functions of the sub control panel keys and indicators.
Essential safety measures for machine installation.
Instructions and warnings for connecting the machine to power.
How to connect the machine to a computer using optional interface boards.
Guidelines on usable paper sizes, weights, and types.
Steps for setting up paper feed and receiving trays before printing.
Precautions for safe handling and operation of the machine.
Information on ink handling and other consumables.
Explains paper document and computer data printing.
Selecting modes to optimize scan quality based on original type.
Function for clearer printing from faint pencil originals.
Enhances photo clarity using dot screening.
Specifies ratios for enlarging or reducing originals.
Adjusts scanning level for density variations.
Erases binding shadow from books/magazines.
Enables printing two originals side-by-side.
Automates master-making and printing in sequence.
Reduces ink consumption by lowering print density.
Generates sample copies to check print quality.
Selects print density from five levels.
Adjusts print position vertically and horizontally.
Selects print speed from five levels.
Prints and sorts into groups with varied copy counts.
Prevents faint copies after extended periods or cylinder changes.
Discards masters after printing to prevent duplication.
Prints via a linked printer; requires specific settings.
Changes default settings for various machine functions.
Sets IP addresses for machine and linked printer.
Defines copy threshold for automatic printer selection.
Step-by-step guide for replacing the ink cartridge.
Instructions for replacing the master roll.
Procedure for emptying the master disposal box.
Guidelines for properly disposing of used consumables.
Steps for removing and installing the print cylinder.
Safety measures before cleaning the machine.
How to clean the thermal print head.
Instructions for cleaning the stage glass and cover.
Procedure for cleaning the pressure roller.
How to clean the exterior of the machine.
Cleaning scanner glass and ADF white sheet.
Interpreting error codes and indicators on the display.
Common problems and their solutions.
Lists available optional accessories for the machine.
Technical specifications for RISO RZ models.
Compares features across different RZ models.
To Next Page
