ritetemp 8035C User Manual

Manual cont.
Manual
TEMPORARY Overide -
ï At the Manual override screen, Touch the Temp Up / Temp Down
arrows to select your desired temporary Target Temperature.
ï Touch HOME to return to operation.
The TEMPORARY icon will go on indicating you have modified the
Target Temp for the current Time Slot only.
The 8035C has 3 manual
override commands. These are
accessed by touching the
Current Temp Display at the
HOME screen (center of
screen).
PG 9
PG 10
Target
Temperature
HOLD
Touch this area to set
a comfortable target
temp for the system
to hold until you return
and remove HOLD.
Return HOME
Temp Up / Temp Down arrows
Touch these to raise and lower
the manual override Target Temp.
Manual Override indicator
Shows you have temporarily
modified the Target Temp.
MANUAL Temporary Override screen
HOLD -
ï At the Manual override screen, Touch HOLD to initiate a hol d
temperature.
ï Touch the Temp Up / Temp Down arrows to select your hold
temperature.
ï Touch HOME to return to operation.
The HOLD ON icon will flash indicating you have changed the
Target Temp.
The system will HOLD this temperature until you return to th is screen
and de-select HOLD, by touching the HOLD icon again.
The Mode Switch must be in
HEAT or COOL mode to override.

ritetemp 8035C Specifications

General

Brand	ritetemp
Model	8035C
Category	Thermostat
Language	English