3 Program
3 Program cont.
NOTE: 60 Second Rule-During programming, if a button is not pushed in
60 seconds, the unit will return to the home screen. Everything you have
changed while programming will automatically be saved.
PG 7
PG 8
ï
Press PROGRAM to go to the programming screen.
ï
Select HEAT with the HEAT/Cool MODE
switch.
ï
Select the day you want to program-
Touch the Day of the week area to cycle through the
days of the week to select the desired day.
ï
Select the time slot you want to program -
Touch the Time slot area to cycle through the 4 time
slots, until it displays the desired time slot.
ï
Select the time of day -
Touch the Time of Day arrows to move the time
selection forward or backward until it displays the
desired time.
ForwardBackward
Select the desired temperature -
ï
Touch the UP temp / Down temp arrows.
Repeat the above procedures for each day of the week and
each time slot of the day as desired.
ï
To REVIEW your program touch REVIEW. Each time slot for each day
or set of identical days, will be displayed every 3 seconds.
ï
Return HOME by touching the home icon.
ï
To COPY the program from the current day to another day -
ï
Touch COPY on the program screen. The current day will remain
solid, the destination day will flash.
ï
Touch the day area to advance the day and select a copy destination.
ï
Touch COPY again to copy all settings to the destination day.
To program for cooling -
ï
Select COOL with the Heat/Cool MODE switch and repeat the above
procedure.
To Next Page
Loading...
Need help?
General
