Add a JOB-SITE name to the
welding location.
Use +/- buttons to select the
characters or numbers of the JOB
SITE. Use STOP / OK buttons to
move back and forward among
the 8 available characters. Once
the cursor is positioned in the last
character, use OK button to store
the value.
Add a name to the Project
Use +/- buttons to select the
characters or numbers of the
PROJECT. Use STOP / OK buttons
to move back and forward
among the 8 available
characters. Once the cursor is
positioned in the last character,
use OK button to store the value.
OPERATING INSTRUCTIONS WITHOUT BARCODE READER
MENÙ 1/6 (MANUAL TYPING OF VOLTAGE AND WELDING TIME)
Ref. MENÙ 3/8 (MANUAL TYPING OF VOLTAGE AND WELDING TIME) page 32
MENÙ 2/6 (PRINTING AND USB CONNECTIONS)
Ref. MENÙ 4/8 (PRINTING AND USB CONNECTION) page 33
MENÙ 3/6 (OTHER FUNCTIONS)
Ref. MENÙ 5/8 (OTHER FUNCTIONS) page 34
MENU 4/6 (OPERATOR)
Ref. MENU 6/8 (OPERATOR) page 35
MENU 5/6 (JOB SITE)
Ref. MENU 7/8 (JOB SITE) page 36
MENU 6/6 (PROJECT)
Ref. MENU 8/8 (PROJECT) page 36
To Next Page
Loading...
