STEP 7
STEP 7
1.Insert 1 screw (M) through hole on the magnet plate (E) then tighten to left side door (15)
by using a
Philips screwdriver.
2.Attach knob (H) to the left side door (15) , insert 1 screw (J) through hole on the left side door (15)
then tighten to knob (H) by using a Philips screwdriver.
3.Insert 2 pins (K) into the holes on each end of the left side door (15).
STEP 8
STEP 8
1.Insert 1 screw (M) through hole on the magnet plate (E) then tighten to right side door (14)
by using
a Philips screwdriver.
2.Attach knob (H) to the right side door (14),insert 1 screw (J) through hole on the right side door (14)
then tighten to knob (H) by using a Philips screwdriver.
3.Insert 2 pins (K) into the holes on each end of the right side door (14).
To Next Page
Loading...
