IMSRM04-E8
71
6. TROUBLESHOOTING
6.1 Troubleshooting
z
To prevent electric shock or instrument failure, always turn off the system
power before replacing the instrument.
z
To prevent electric shock or instrument failure, always turn off the power
before mounting or removing the instrument.
z
To prevent electric shock or instrument failure, do not turn on the power until
all the wiring is completed.
z
To prevent electric shock or instrument failure, do not touch the inside of the
instrument.
z
All wiring must be performed by authorized personnel with electrical
experience in this type of work.
WARNING
!
To Next Page
Loading...
Need help?
General