5. OPERATION
IMR02L04-E3
5-17
Parameter setting for Event memory group
Set the Event memory group after PID memory group.
Event set value from 1 to 4 (EV1 to EV4) [high] and Event set value from 1 to 4 (EV1
' to EV4')
[low] display when selecting Deviation high/low (High/Low individual setting) or Band (High/Low
individual setting) at function blocks from 41 (F41.) to 44 (F44.) in the Engineering mode.
When setting “0” to Event type at the function block 41 (F41.) to 44 (F44.) in the Engineering
mode, the Event setting screens for relative parameters do not display. When setting “0” to all
parameters of Event 1 to Event 4, all screens related to Event do not display, including the Event
memory group setting block screen.
For data range of parameter, refer to 4.5.3 Parameter setting mode (P. 4-16).
For Event function, refer to 6.4.1 Setting procedure of Event 1 to 4 in the PF900/PF901
Instruction Manual (IMR02L03-E) on the CD-ROM.
Event memory group
setting block
PV
EVENT
M:S
SV
30000000200
0 1
0 1
PV
P EV.GR
M:S
SV
53000000001
0 1
0 1
Event memory group
number
PV
ZOEV1
$
M:S
SV
GR.1 00-00050
0 1
0 1
Event 1 set value (EV1) o
Event 1 set value (EV1)
[high]
PV
Z EV1`
$
M:S
SV
GR.1 00-00050
0 1
0 1
Event 1 set value (EV1')
[low]
EV2: Event 2 set value (EV2)
Event 2 set value (EV2) [
high]
EV2`: Event 2 set value (EV2') [low]
EV3: Event 3 set value (EV3)
Event 3 set value (EV3) [high]
EV3`: Event 3 set value (EV3') [low]
EV4: Event 4 set value (EV4)
Event 4 set value (EV4) [high]
EV4`: Event 4 set value (EV4') [low]
Set Event memor
group number
Displays Group
number
being set.
Set Event 1 se
value.
Unit
display
PID memory group
setting
Wait memory group
setting
To go back to the first Event memory group setting block at the end of the
setting, press the STEP
R.SET direct key while pressing the
key.
(Go to the next page)
(P.4-19, P.4-23)
To Next Page
Loading...
Need help?
General
