To Next Page
D
Dr. Kathryn Thompson MDAug 12, 2025
Why is my RKC INSTRUMENT Controller not responding?
- RryoungAug 12, 2025
If your RKC INSTRUMENT Controller is not responding, the issue could stem from several causes: * There might be trouble with the communication cable, or it might not be properly connected. Ensure that the communication cables and connectors are securely in place. * The communication speed might be incorrect. * The device address designation might differ. * The data construction could be incorrect. * The transmission line might not be set to the receive state after data send. In this case, check the program on the host computer side.
General
