RKC INSTRUMENT PF Series User Manual

5. OPERATION
IMR02L04-E3
5-18
 Parameter setting for Wait memory group
Set the Wait memory group after Event memory group.
For data range of parameter, refer to 4.5.3 Parameter setting mode (P. 4-16).
For Wait function, refer to 6.6 Wait (P. 6-10).
PV
WAIT
M:S SV
FIX000VSCI.1
0 1
0 1
Wait memory group
setting block
PV
L WT.GR
M:S SV
F60.01R00001
0 1
0 1
PV
TM.OUT
M:S SV
GR.1 000000:00
0 1
0 1
Wait time-out set value
PV
ZONE.H $
M:S SV
GR.1 00000010
0 1
0 1
Wait zone high
PV
ZONE.L $
M:S SV
GR.1 000-0010
0 1
0 1
PV
RE.TRG
M:S SV
GR.1 00000001
0 1
0 1
Wait release trigger
selection
Wait memory group
number
Wait zone low







Set Wait memory
group number.
Displays Group
number
being
set.
Set Wait zone
high to 10 C.
Set Wait zone low to
10 C.
Set Wait release trigger to
00001.
[00001:
Zone wait 1 (the controller)]
Wait time-out set value is not
specified in this setting example
(set 000:00).
Time signal memory
group setting
PID memory group
setting


(Go to the next page)
(P.4-19, P.4-24)

RKC INSTRUMENT PF Series Specifications

General

Brand	RKC INSTRUMENT
Model	PF Series
Category	Controller
Language	English