RKC INSTRUMENT PF Series User Manual

5. OPERATION
IMR02L04-E3
5-19
 Parameter setting for Time signal memory group
Set Time signal memory group after Wait memory group. Time signal memory group consists of time signal
setting with 16 memory groups.
For data range of parameter, refer to 4.5.3 Parameter setting mode (P. 4-16).
For Time signal function, refer to 6.9 Time Signal (Segment Signal) (P. 6-21).
Time signal memory
group setting block
PV
TM.SIG
M:S SV
30000000200
0 1
0 1
PV
P TS.GR
M:S SV
53000000001
0 1
0 1
Time signal memor
y
group number
Displays Time signal memory number 1.
Wait memory group
setting
PV
01.OUT
M:S SV
GR.1 00000001
0 1
0 1
Time signal output
assignment
Set Time signal output
assignment to 00001.
[00001: Time signal 1]
Set Time signal
memory group
number
Displays Group
number
being set.



PV
0 1 .S .S N
M:S SV
GR.1 00000002
0 1
0 1
Start segment of
time signal
Set Start segment numbe
r
of time signal to 2.
PV
0 1 .S .T M
M:S SV
GR.1 000010:00
0 1
0 1
Time signal start time
Set Time signal time to
10 minutes.
PV
0 1 .E .S N
M:S SV
GR.1 00000003
0 1
0 1
End segment of
time signal
Set End segment numbe
r
of time signal to 3.
PV
0 1 .E .T M
M:S SV
GR.1 000020:00
0 1
0 1
Time signal end time
Set Time signal end time
to 20 minutes.
PV
02.OUT
M:S SV
GR.1 00000001
0 1
0 1
Time signal output
assignment




Displays Time signal memory number 2.
Follow the same setting
procedure for Time signal
memory number 2 as the
first Time signal memory
number.

Set Time signal memory number 1
Set Time signal memory number 2
PV
03.OUT
M:S SV
GR.1 00000001
0 1
0 1
Time signal output
assignment
Once all the required parameters
have been set, press the

ke
y
and the STEP R.SET key to return
to the first Time signal memor
y
group setting block.

PV/SV monitor
(Reset mode)
PV
00028 $
TM SV
530:00000200
0 1
0 1

Setting end


(P.4-20, P.4-24)

RKC INSTRUMENT PF Series Specifications

General

Brand	RKC INSTRUMENT
Model	PF Series
Category	Controller
Language	English