13
2. Always cross cables under the hitch as shown in Figure 3. In the event of hitch
failure, the crossed cables may help support the tow bar preventing it from
pole-vaulting the towed vehicle.
Cables must
be crossed.
Route safety cables
through channels.
Figure 3
Short cables
How to Use Safety Cables
1. Connect the cables to the anchor bracket by inserting the cables through the
anchor bracket and dragging down (Figure 2). If your baseplate has short cables
on the car, attach them to holes "A" (Figure 1) with a Quick-link (not included).
Quick-link
To Next Page
Loading...
