Robe Robin BMFL Blade - Page 45

DMX protocol
1 2
1 1
Pan
0 - 255 Pan movement by 540° proportional
2
2
Pan Fine
Robin BMFL Blade - DMX protocol
version 1.2 Mode 1 - Standard 16 bit, Mode 2 - Reduced 8 bit
Mode/channel
DMX
Value
Function
Type of
control
2
2
Pan Fine
0 - 255 Fine control of pan movement proportional
3 3
Tilt
0 - 255 Tilt movement by 270° proportional
4 4
Tilt fine
0 - 255 Fine control of tilt movement proportional
5 5
Pan/Tilt speed , Pan/Tilt time
0
Standard mode
0
Standard mode
step
1 Max. Speed Mode step
Pan/Tilt speed mode
2 - 255 Speed from max. to min. proportional
Pan/Tilt time mode
2 - 255 Time from 0.2 s to 25.5 sec. proportional
6
6
Power/Special functions
6
6
Power/Special functions
0 - 9 Reserved
To activate following functions, stop in DMX value for at least 3 s
and shutter must be closed at least 3 sec. („Shutter,Strobe”
channel 47/41 must be at range: 0-31 DMX). Corresponding menu
items are temporarily overriden except DMX Input.
10-14
DMX input: Wired DMX *
step
15-19
DMX input: Wireless DMX *
step
* function is active only10 seconds after switching the fixture on
20-24
Graphic display On
step
25-29
Graphic display Off
step
30-34
Reserved
35-39
Lamp power 1500W
step
40-44
Lamp power 1700W
step
45-49
Quiet mode
step
45-49
Quiet mode
step
50-54
Dimmer curve: Square law
step
55-59
Dimmer curve: Linear
step
60-64
Fans mode: Auto
step
65-69
Fans mode: High
step
70-89
Reserved
90 - 94 Pan/Tilt speed mode step
95-99
Pan/Tilt time mode
step
95-99
Pan/Tilt time mode
step
100 - 104 Blackout while pan/tilt moving step
105 -109 Disabled blackout while pan/tilt moving step
11 0-114 Blackout while colour wheels moving step
115 -119 Disabled blackout while colour wheels moving step
120-129 Reserved
To activate following functions, stop in DMX value for at least 3
seconds.
seconds.
130 - 139 Lamp On step
140 - 149 Pan/Tilt reset step
150 - 159 Colour system reset step
Page 1