Robe ROBIN T1 Profile - Page 46

DMX protocol
1 2 3
33 * 37 0
34 21 38 128
35 * 39 0
36 22 40 128
37 * 41 0
38 23 42 128
39 24 43 0
40 25 44 128
41 26 45 0
42 27 46 128
43 28 47 0
44 29 48 128
45 30 49 0
46 31 50 128
47 32 51 32
48 33 52 0
49 * 53 0
1 2 3
1 1 1
Pan
0 - 255 Pan movement by 540° (128=default) proportional
2 2 2
Pan Fine
0 - 255 Fine control of pan movement (0=default) proportional
3 3 3
Tilt
0 - 255 Tilt movement by 265° (128=default) proportional
4 4 4
Tilt fine
0 - 255 Fine control of tilt movement (0=default) proportional
5 5 5
Pan/Tilt speed , Pan/Tilt time
0 Standard mode (0=default) step
1 Max. Speed Mode step
Pan/Tilt speed mode
2 - 255 Speed from max. to min. proportional
Pan/Tilt time mode
2 - 255 Time from 0.2 sec. to 25.5 sec. proportional
6 6 6
Power/Special functions
Factory display menu setting: DMX Input-Wired ,Graphic display-
On, Pan/tilt Mode-Speed,Blackout while pan/tilt moving-Off,
Blackout while gobo wheel moving-Off, Fans mode-Auto
0 -9 Reserved (0=default)
To activate following functions, stop in DMX value for at least 3 s and
shutter must be closed at least 3 sec. („Shutter,Strobe” channel 47/32/51
must be at range: 0-31 DMX). Corresponding menu items are temporarily
overriden.
10-14
DMX input: Wired DMX *
step
15-19
DMX input: Wireless DMX *
step
* function is active only 10 seconds after switching the fixture on
Mode/channel
DMX
Value
Function
Type of
control
Framing shutter 4 movement
Framing shutter 4- swivelling
Shutter/ strobe
Dimmer intensity
Dimmer intensity - fine
Framing shutter 1- movement
Framing shutter 1- swivelling
Framing shutter 2- movement
Framing shutter 2- swivelling
Framing shutter 3 movement
Framing shutter 3- swivelling
Iris - fine
Zoom
Zoom - fine
Focus
Focus - fine
Framing shutters module rotation
Mode/channel
Default
DMX Value
Function
Page 2