Robern M Series - Tools Needed; Parts

3
Part no. CB-209-1428 08/11/22
M Series Reserve Recess Cabinet
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
Installation instructions
TOOLS NEEDED
PARTS
(3-4) Glass Shelves
(1) M Series Reserve Cabinet
Depending on
installation,
not all parts
will be used.
[SS134]
(10) Hole Plugs
[SS672]
(6) Screw Caps
[216-1244] D4 Hardware Bag
36" and taller cabinets
[SS674]
(6) #10 x 2" Screws
[211-1376]
(4) Shelf Clips
[211-1377]
(4) Shelf Clips
Depending on
installation,
not all parts
will be used.
[SS134]
(10) Hole Plugs
[SS672]
(6) Screw Caps
[216-1248] D6 Hardware Bag
36" and taller cabinets
[SS674]
(6) #10 x 2" Screws
[211-1305]
(8) Shelf Clips
Depending on
installation,
not all parts
will be used.
[SS134]
(10) Hole Plugs
[SS672]
(6) Screw Caps
[216-1243] D4 Hardware Bag
30" tall cabinets
[203-1624]
(2) Hinge Clip
[SS674]
(6) #10 x 2" Screws
[211-1376]
(3) Shelf Clips
[211-1377]
(3) Shelf Clips
Depending on
installation,
not all parts
will be used.
[SS134]
(10) Hole Plugs
[SS672]
(6) Screw Caps
[216-1247] D6 Hardware Bag
30" tall cabinets
[SS674]
(6) #10 x 2" Screws
[211-1305]
(6) Shelf Clips
[203-1624]
(2) Hinge Clip
[203-1624]
(3) Hinge Clip
[203-1624]
(3) Hinge Clip
NOTE: Two door and 72" tall cabinets will receive two (2) of the cabinet specic hardware bags above.
Two door and 72" cabinets
(6-8) Glass Shelves