EasyManua.ls Logo

Roberts Blutune 40 - Setting Alarm Times

Roberts Blutune 40
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
Setting alarm times
Your radio has two alarms which can be set to wake you to DAB, FM
radio or beep type alarm. Each alarm can be set to sound once, daily, on
weekdays or at weekends.
Note: The alarms can only be set when your radio is in standby mode.
Note: If no buttons are pressed for 1 minute, your radio will exit the alarm
setup.
1. If necessary, press and release the On/Off button to switch off your
radio.
2. Press and hold the Alarm 1 or Alarm 2 button.
3. 'Alarm 1' or 'Alarm 2' will show on the display and the alarm indicator
will ash on the display.
4. Press and release the Tuning control to enter the alarm setting menu.
5. Rotate the Tuning control to select ON or OFF. If OFF is selected any
current setting for that alarm will be cancelled.
6. With 'ON' selected press and release the Tuning control to cause the
alarm hour digits to ash on the display.
7. Rotate the Tuning control to choose the desired alarm hour.
1
4-7
2
2

Related product manuals