Using the AC adaptor
1. Place your radio on a fl at surface.
2. Plug the mains adaptor into the DC input socket located on the left
hand side of your radio (marked 'DC') ensuring that the plug is pushed
fully into the socket.
3. Plug the other end of the mains adaptor into a standard mains socket
outlet and switch on the wall socket. Whenever the adaptor is used
the batteries are automatically disconnected.
The AC adaptor should be disconnected from the mains supply and
from the radio when not in use.
IMPORTANT: The mains adaptor is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains completely, the mains adaptor should be removed from the mains
socket outlet completely.
DC
5
To Next Page
Loading...
