25
Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can
make quieter sounds easier to hear when your radio
is used in a noisy environment.
1. Press and release the Mode button until the DAB
mode is selected.
2. Press and hold the Menu button.
3. Press the Tuning Up or Down buttons until ‘DRC
value’ is highlighted on the display. Press the
Select button to enter the DRC settings menu.
4. Press the Tuning Up or Down buttons to select
the required DRC setting (the default is Off).
DRC Off - DRC is switched off, Broadcast DRC
will be ignored. DRC Low - DRC level is set to
half that sent by broadcaster. DRC High - DRC
level is set as sent by broadcaster. The current
DRC setting will be marked with an asterisk.
5. Press the Select button to confi rm the setting.
The display will return to the previous display.
Note: Not all DAB broadcasts are able to use the
DRC function. If the broadcast does not support DRC,
then the DRC setting in the radio will have no effect.
To Next Page
Loading...
