79
System reset
If your radio fails to operate correctly, or some digits
on the display are missing or incomplete carry out
the following procedure. Your radio will automatically
re-scan for the DAB stations available at your current
location when it restarts.
1. Switch on your radio. Press and hold the Menu
button to enter the menu.
2. Press the Tuning Up or Down buttons until
‘System’ is highlighted on the display. Press and
release the Select button.
3. Press the Tuning Up or Down buttons until
‘Factory Reset’ is highlighted on the display.
Press and release the Select button.
4. If you wish to perform the reset operation, press
the Tuning Up or Down until ‘Yes’ is highlighted
on the display and press and release the Select
button. A full reset of your radio will be performed.
All presets and station lists will be erased.
• If you do not wish to reset your radio press the
Tuning Up or Down until ‘No’ is highlighted and
then press and release the Select button. Your
radio will exit the menu.
To Next Page
Loading...
