34
3. Press the button marked "M" (memory), the memory symbol "M" will
flash in the display for approx. 15 seconds.
4. Press any one of the keyboard buttons numbered 1 - 9. The memory
symbol "M" will stop flashing and your station will be stored in the
memory position selected.
Note:
Stations can only be preset while the memory symbol "M" is flashing in
the display.
On SW and FM a further 9 stations can be preset by using memory
locations 01 - 09.
e.g. to store a SW station in memory location 02. Press the button marked
"M" (memory) followed by the buttons marked [0] and [2].
FM
M
MHz
FM
M
MHz
To Next Page
Loading...
