If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Setting the clock time
1. When first connected to mains or batteries the display will show "0:00"
2. Hold down the Mode button until the display begins to flash.
3. Set the hours using the - button and the minutes using the + button.
4. Press the Mode button to store the time.
Note: The clock uses the 24 hour system e.g. 2:00pm is shown as 14:00
Setting the alarm time
1. Press and release the Mode button. The current alarm time and a
flashing alarm symbol will appear in the display.
2. Press and hold down the Mode button until the alarm time flashes in
the display.
3. Set the hours using the - button and the minutes using the + button.
4. Press the Mode button to store the alarm time.
Tuning
Tuning
Mode
Mode
Mode
Mode
Mode
6
R9905 Instruction Book.pm6 24/10/99, 14:217
To Next Page
Loading...
