If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Pre-setting stations
You may store up to five different stations on each of the three wavebands
giving a total of 15 preset stations.
1. Switch on your radio using the Power button.
2. Select the desired waveband using the Waveband switch.
3. Tune into the required station using one of the tuning methods
previously described.
4. Press and release the Memo button a flashing 'M' will appear in the
display.
5. Whilst the 'M' is flashing press one of the Preset buttons under which
you wish to store the station.
6. Press and release the Memo button to store the station. The preset
number will now appear alongside the 'M' in the display.
7. Repeat the above proceedure for the remaining presets.
8. Press the Power button to turn off your radio.
Note: Pre-setting of stations can only be carried out whilst the 'M' is flashing
in the display (5 seconds).
FM
MW
LW
Memo
Tuning
123
45
Memo
8
R9905 Instruction Book.pm6 24/10/99, 14:219
To Next Page
Loading...
