Wake to buzzer
1. Set the alarm time as previously described.
2. Switch off your radio using the Power Button. Repeatedly press and
release the Alarm button until the symbol appears in the display.
3. At the preselected time the radio will turn on. The radio will switch off
automatically after 90 minutes. The radio alarm may be turned off for
24 hours by pressing the Power button.
4. To permanently cancel the buzzer alarm repeatedly press and release
the Alarm button until the symbol is removed from the display.
Alarm
Display
Display
Alarm
Setting the alarm time
1. Press and hold down the Alarm button.
2. Whilst the Alarm button is held down set the alarm time using the
+ or - buttons.
3. Release the Alarm button when alarm setting is complete.
Displaying the alarm time
1. Ensure that the radio is switched off.
2. Press the Display button once to display alarm time. Clock time will
resume automatically after 3 seconds.
Alarm
Tuning
Display
Display
9
R9906 Instruction Book.pm6 24/10/99, 14:2210
To Next Page
Loading...
