Roberts R9921 - ATS and RDS Operation

The automatic tuning system will scan the
selected waveband and automatically store
stations in the memory presets.
note: ATS operates on FM an MW bands only -
activating the ATS function will overwrite any
stations previously stored in the memory presets
1. Select the required waveband by pressing the
Bands button.
2. Press and hold down the ATS button until
frequency digits in the display begin to change
rapidly. Your radio will scan the selected
waveband and automatically store stations in
memory presets.
ATS (Automatic Tuning System)
16
123
M
MHz
ST
456789