8
FM Radio
1. Make sure that the aerial is fully extended and the unit is in a location
that can receive a strong FM/DAB signal.
2. Press the MODE button
3. Turn the Tuning dial and push to choose FM.
4. Press the tuning dial to scan to the next station. It will scan up if the dial
was previously turning clockwise and will scan down if the dial was
previously turned anti clockwise.
5. Turn the Tuning dial to manual tune.
Scan Setting (local/distant): Local setting will only allow the scan to stop on
stronger stations with a good signal. The distant setting can be used to find
weaker stations that may have some interference in the background. Alter the
Scan Setting option in the MENU.
Audio Setting (stereo/mono): The system will play stereo whenever a strong
enough signal is present. It is an option to force the signal to play mono if a
station is weaker and causes the system to alternate between stereo and mono
playback. Alter the Audio Setting option in the MENU.
Info: The system can show either, Program Text, Signal Strength or Date/Day.
Alter the Info option in the MENU.
To Next Page
Loading...
