Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment.
1. Press the On/Off
button to switch on your radio.
2. Press the
Mode button to select DAB mode.
3. Press the
Menu button to enter the DAB menu list.
4. Rotate the Tuning/Select control until the display shows 'DRC'.
5. Press and release the Tuning/Select control to enter adjustment
mode. The current DRC setting will be indicated with an asterisk.
6. Rotate the Tuning/Select control to select the required DRC setting
(the default is Off).
DRC Off - DRC is switched off, Broadcast DRC will be ignored.
DRC high - DRC is set as sent by broadcaster.
DRC low - DRC level is set to 1/2 that sent by broadcaster.
7. Press and release the Tuning/Select button to confirm the setting.
The display will return to normal tuning mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
4-7
1
2
3
To Next Page
Loading...
