Roberts WiFi Internet Radio WM-202 - Setting the Clock; Setting the Date

54
Setting the date
1. Press the On/Off button to switch on your radio.
2. Access the main menu by pressing the Menu button until the 'Main menu'
option is shown, then select this with the Tuning/Select control.
3. Rotate the Tuning/Select control until 'System setup' is highlighted
on the display. Press the control to enter the system setup menu.
4. Rotate the Tuning/Select control until 'Time setup' is highlighted on
the display. Press the control.
5. Rotate the Tuning/Select control until 'Set date' is highlighted on the
display. Press the control to enter date setup. The day digits will be
flash.
6. Rotate the Tuning/Select control until the correct day is highlighted
on the display. Press the
control to enter the day and the month digits
will then flash.
7. Rotate the Tuning/Select control until the correct month is highlighted
on the display. Press the
control to enter the month and the year digits
will then flash.
8. Rotate the Tuning/Select control to select the correct year. Press the
control to enter the year. The display will then return to the previous
menu.
2-8
1
2
Clock and Alarms .
WM-202 iss 1.indd 55 20/02/2008 13:04:06