3
INSTALLATION LOCATION
Wallplate Installation
1 Horizontal Mount
2 Vertical Mount
For a vertical mount, put screws on
the top and bottom.
For a horizontal mount, put screws
on the left and the right.
Caution:
Electrical Hazard
Disconnect power before installing this
product. Failure to do so can cause
electric shock or equipment damage.
Mercury Notice
This product is mercury-free. However,
if this product is replacing a control
which contains mercury, it needs to
be disposed of properly. Contact your
local waste management authority for
instructions regarding recycling and
proper disposal of the control.
To Next Page
Loading...
