5.
5-1
CAUTIONS
1)
Because some mating parts with wear surfaces were machined together when the engine was
manifactured,
or
have established wear patterns during operation, the reassembly
of
engine parts,
is
critical to the performance and life expectancy
of
the engine.
MARK AND SORT ALL PARTS
SO
THAT THEY WILL
BE
DISASSEMBLED AND INSTALLED IN THEIR ORIGINAL
POSITIONS.
2)
Crankshaft and camshaft bearings should be cleaned
and
inspected, and removed only
if
they appear
to be damaged
or
excessively worn. Remove bearings that are pitted, nicked, burred, discolored,
or
that rotate roughly
or
noisily.
3)
Keep clean and handle carefully the disassembled parts, Clean them thoroughly with washing oil
before the reassembly.
4)
Use correct tools
in
the proper way
The use
of
non-specified tools could cause permanent damage to the engine
or
components.
5-2
SPECIAL TOOLS
Tool
No.
Use
Tool
209
-
95004
-
07
For
pulling
off
the flywheel Eli1
7,
EH25
Flywheel puller
with
bolt
Market parts
For pulling
off
the flywheel EH12
Flywheel puller
FLYWHEEL
PULLER
FLYWHEEL PULLER
-
15
-
To Next Page
Loading...
Need help?
General
