(6)
Test the operation of the recoil starter to see
if
the rope recoils satisfactorily and the ratchets project
and retract properly.
Mount
the recoil starter to the engine.
(7)
If
the
spring
escapes from the reel when disassembling the recoil, hook the outer
end
of
the spring
-
onto the notch
of
the reel and rewind the spring into the housing.
(8)
Lubricate the rotating parts, sliding parts and spring
with
heat resistant grease
or
mobile oil when
reassembling the recoil and prior to
long
term storage.
-
52
-
To Next Page
Loading...
Need help?
General
