15.
CHECKS
and
CORRECTIONS
P
After disassembling and cleaning the engine, check and repair, if necessary, according to the correction table. The correction
table applies whenever the engines are repaired.
It
is important for the servicemen to be familiar with the contents of this
table. Correct maintenance
is
recommended by observing the correction standards specified.
The meanings of the terms
used
in the correction table
are
as follows:
Correction
Repair, adjustment
or
replacement
of
any engine parts.
Correction Limit
The limit on wear, damage or functional deterioration of engine parts beyond which normal engine performance can-
not be expected without repairing such parts.
Use Limit
The limit beyond which parts can
no
longer be used in respect of performance
or
strength.
Standard Dimensions
The design dimensions
of
new parts minus tolerance.
Correction Tolerance
Tolerance on the dimensions
of
engine parts refinished or adjusted.
-
58
-
To Next Page
Loading...
Need help?
General
