Day&Night IP Camera
3.1. Information
The first page of the web configuration of the IP CAM is the information page.
You can see the model name/firmware version, IP CAM ID, registration status,
network type and current video settings( bandwidth, resolution) in this page.
The IP CAM can be viewed remotely by the PC/Phone software only
when the IP CAM is registered. If this IP CAM is not registered, please check the
Ethernet wiring of your network environment. The “Network type” field displays the
network connection(wired or wireless) and method(DHCP, PPPoE or static ip) the IP
CAM is running. The “Video users” field displays the number of connected video
viewing users.
Figure 3-3: IP CAM Information page
17
To Next Page
Loading...
