Day&Night IP Camera
3.15. Date/Time
The IP CAM can synchronize the date/time with the universally available time
server( for example time.windows.com) through NTP protocol. The date/time will then
be corrected with the time server anytime when the Internet is connected.
Users can choose the different TimeZone of their areas to display the correct
time. For some TimeZone areas, the “Daylight Saving Time” could be enabled or
disabled. When the “Daylight Saving Time” is enabled, the start and stop time of the
Daylight Saving Time could be edited.
The camera has an internal real time clock that can maintain the date/time even
when the camera is not connected to internet.
Figure 3-23: System date/time settings page
40
To Next Page
Loading...
