EasyManuals Logo

Robomow RK1000 User Manual

Robomow RK1000
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
74 75
Near wire follow
Use this feature to reduce wheel tracks along the perimeter when the
mower travels back home to the Base Station. It works by allowing the
mower to travel at various distances from the wire on each trip instead of
always being centered directly over the wire.
Each lawn is dierent, so will require some experimentation to nd the
optimum min. and max. values.
Separated Zone
If you have a separated zone in your lawn, you need to set the separated
zone switch to ‘ON’. This will allow you to select “separated zone” from the
mower’s home screen to initiate mowing after manually placing the mower
in your separated zone. Remember to bring your mower back to the Base
Station at the end of an operation in a separated zone so that it can charge
and be ready to continue the automatic plan without missing an operation.

Table of Contents

Other manuals for Robomow RK1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Robomow RK1000 and is the answer not in the manual?

Robomow RK1000 Specifications

General IconGeneral
Cutting Width21 cm
Cutting Height20-100 mm
Battery TypeLithium-Ion
Battery Capacity4.3 Ah
Max Lawn Size1000 m²
Slope Capability45%
Noise Level60 dB
Battery Voltage18 V
Charging Time60-120 minutes
Working Time60 minutes

Related product manuals