To Next PageTo Next Page
Need help?Do you have a question about the Robopac Ecoplat FRD and is the answer not in the manual?
General| Maximum Load Weight | 1200 kg |
|---|---|
| Maximum Wrapping Height | 2200 mm |
| Power Supply | 230 V, 1-phase, 50 Hz |
| Film Width | 500 mm |
| Max Wrapping Height | 2200 mm |
| Max Load Weight | 1200 kg |
| Power Consumption | 1 kW |
| Film Pre-stretch | Up to 250% |
| Cycle Time | Variable depending on settings |
Outlines general safety principles, user responsibilities, and hazard awareness.
Covers norms for safe adjustments, maintenance, and use of original spare parts.
General recommendations before performing adjustments, focusing on safety.
Instructions for adjusting film tension based on reel carriage type.
Guidance on safe operation, user behavior, and initial familiarization with controls.
General instructions for operator-performed maintenance and when to contact service.
A schedule detailing maintenance tasks, frequency, procedures, and references.
Lists common alarm messages, their causes, and recommended solutions for troubleshooting.
Guidelines and warnings for performing part replacements and forbidden operations.
