2. SAFETY INFORMATION
2.1. GENERAL SAFETY WARNINGS
Caution - warning
Carefully read the “Instructions for use” specified in the manual and those applied directly to the machine.
It is important to dedicate a little time to read the “Instructions for use” in order to minimise the risks and
avoid unpleasant accidents.
Before performing any operation, the operator must make sure that he/she has understood the
“instructions for use”.
Danger - warning
Pay attention to the safety warnings, do not misuse the machine and assess the possible residual risks.
Caution is essential.
Safety is also in the hands of those who interface with the machine throughout its life span.
Important
Sometimes, accidents can be caused by a “careless” use of the machine by the operator.
Usually it is too late to remember what should have been done when the accident has already happened.
Caution - warning
Preserve the readability of the information signs and observe the indications given.
The information signs may have different shapes and colours, indicating hazards, obligations, prohibitions
and indications.
Tampering with the safety devices and the removal of the same may create risks (even severe) for the
operators.
The personnel authorised to carry out any operation with the machine must have acknowledged
experiences in the specific field.
Important
The manufacturer is not responsible for any damage to the packaged product occurred during wrapping,
stabilisation and following operations.
Important
Non-compliance with the instructions given may cause risks to the safety and health of people, as well as
economic damages.
To Next Page
Loading...
Need help?
General
