1.3.1. PICTOGRAMS INDICATING DANGER
The following table summarises the safety-related pictograms which indicate DANGER.
ATTENTION - GENERIC DANGER
This draws the attention of the personnel concerned to the risk of physical injuries caused by the operation
described if it is not carried out in compliance with safety regulations.
ATTENTION - DANGER DUE TO CONTACT WITH LIVE PARTS
This indicates to the personnel concerned that the described operation poses, if not carried out in
compliance with safety regulations, a risk of electric shock.
ATTENTION - DANGER DUE TO FLAMMABLE MATERIAL
ATTENTION - DANGER DUE TO MOVING PARTS
ATTENTION- DANGER DUE TO HIGH TEMPERATURES
ATTENTION - DANGER DUE TO SUSPENDED LOADS
ATTENTION - DANGER DUE TO CONTACT WITH OVERHEAD OBSTACLES
ATTENTION - TRIPPING OR FALLING DANGER
ATTENTION - TANGLING DANGER
It signals to the concerned personnel that the device bearing this pictogram features parts where there is
the risk getting tangled when accessed.
ATTENTION - HAND CRUSHING DANGER
ATTENTION - SHEARING DANGER
ATTENTION - CUTTING DANGER
It signals to the concerned personnel that the device on which the pictogram is located has sharp parts that
may injure their hands.
ATTENTION - DANGER DUE TO CARRIAGE MOVEMENT
ATTENTION - EXPLOSION DANGER
To Next Page
Loading...
Need help?
General
