Need help?Do you have a question about the Robopac Masterplat PLUS PGS Series and is the answer not in the manual?
General| Max Load Weight | 2000 kg |
|---|---|
| Max Load Height | 2200 mm |
| Film Width | 500 mm |
| Max Film Roll Diameter | 300 mm |
| Max Wrapping Height | 2200 mm |
| Max Load Diameter | 1200 mm |
| Turntable Diameter | 1650 mm |
| Film Thickness | 17-35 µm |
| Production Speed | Up to 40 loads/hour |
| Power Supply | 230 V, 50/60 Hz |
| Production Capacity | Up to 40 loads/hour |
| Maximum Load Dimensions | 1200 x 1200 mm |
| Turntable Speed | 0-12 rpm |
| Film Carriage Type | PGS (Pre-Stretch System) |
| Film Tension Control | Adjustable |
| Control Panel | Touchscreen |
| Wrapping Programs | Multiple programmable |
Defines the manual's aim to provide operator instructions to prevent risks from human-machine interaction.
Machine identification plate, terms and definitions used in the manual.
Explanation of pictograms indicating danger, prohibition, and obligation.
How to request assistance, attached documentation, and how to read the instructions.
Core safety warnings for machine use, handling, installation, and misuse.
Warnings on residual risks, adjustments, maintenance, electrical, signs, and perimeter areas.
General machine description, models, operation cycle, safety devices, electrical, pneumatic, and accessories.
Dimensional and technical data for Masterplat PLUS, LP, and TP3 models, including spool characteristics.
Recommendations for handling, packing, transport, installation, fixing, and connections.
Guides for film stretch, spool carriage, chain, gear, and guide wheel adjustments.
Recommendations for operation, controls, user interface, cycles, and parameters.
Maintenance recommendations, periodical intervals, lubrication, condensate drainage, and cleaning.
Alarm messages, troubleshooting, recommendations for part replacement, and spare parts list.
Warranty conditions and presser pneumatic diagram.
To Next Page