Roborock H7 User Manual

45. Q: What should I do if I accidentally vacuum
water or liquid?
A: Please remove the dust bin and cyclone tube parts of the vacuum cleaner and leave
the main unit in a cool place to dry. Use water to clean parts such as the dust bin, the red
secondary tube, the primary filter, and the rear filter. Let them dry and then put them back
together to use the vacuum cleaner again.
46. Q: The vacuum cleaner is sucking in and
expelling air and twitching. What is happening?
A: When the filters, brush heads, or extension tube are blocked, the fan will suck in and
expel air as a protective measure. If the blockage remains after a few tries, the machine
will stop temporarily and a blockage warning will appear on the screen. Please check and
wash the primary filter and rear filter, check the extension tube and brush heads for
blockage and clear them.
47. Q: Can the floor brush head be used on short
pile carpets?
A: Yes, the floor brush head can be used on short pile carpets. However, it is not
recommended to use it on medium and long pile carpets. This may cause overcurrent or
overheat issues. When rotation resistance is high, the floor brush may activate
overcurrent and overheat protection, which is normal.
48. Q: Why are there two rows of holes on the sides
of the crevice tool?
A: The small holes are ventilation holes to ensure sufficient airflow to generate suction
and avoid the air inlet from being completely blocked.

Roborock H7 Specifications

General

Product type	Stick vacuum
Dust capacity	- L
Product color	Grey, Red
Dust container type	Dust bag
Removable handheld vacuum	Yes
Display type	OLED
Cleaning type	Dry
Vacuum air filtering	HEPA
Dirt separating method	Filtering
Number of filter layers	5 pc(s)
Power source	Battery
Charging time	2.5 h
Suction power	160 AW
Maximum input power	480 W
Quantity per pack	1 pc(s)
Quantity	1
Number of dust bags	2 pc(s)
Vacuum brushes included	Dusting brush, Mini motorized brush

Weight and Dimensions

Depth	230 mm
Width	111 mm
Height	284 mm
Weight	1461 g