Robustel GoRugged R2000 Dual - Commands Reference

Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 113/116
Confidential
network_type Network Type
band_select_type Band Select Type
band_gsm_850 GSM 850
band_gsm_900 GSM 900
band_gsm_1800 GSM 1800
band_gsm_1900 GSM 1900
band_wcdma_850 WCDMA 850
band_wcdma_900 WCDMA 900
band_wcdma_1900 WCDMA 1900
band_wcdma_2100 WCDMA 2100
band_lte_800 LTE 800 (band 20)
band_lte_850 LTE 850 (band 5)
band_lte_900 LTE 900 (band 8)
band_lte_1800 LTE 1800 (band 3)
band_lte_1900 LTE 1900 (band 2)
band_lte_2100 LTE 2100 (band 1)
band_lte_2600 LTE 2600 (band 7)
band_lte_1700 LTE 1700 (band 4)
band_lte_700 LTE 700 (band 17)
band_tdd_lte_2600 TDD LTE 2600 (band 38)
band_tdd_lte_1900 TDD LTE 1900 (band 39)
band_tdd_lte_2300 TDD LTE 2300 (band 40)
band_tdd_lte_2500 TDD LTE 2500 (band 41)
# set cellular sim 1 phone_number 18620435279
OK
…
# config save_and_apply
OK // save and apply current configuration, make you configuration effect
5.3 Commands Reference
Commands
Syntax
Description
Debug
Debug parameters
Turn on or turn off debug function
Show
Show parameters
Show current configuration of each function , if we need to
see all please using “show running ”
Set
Set parameters
Add parameters
All the function parameters are set by commands set and add,
the difference is that set is for the single parameter and add is
for the list parameter
Add
Note: Download the config.XML file from the configured web browser. The command format can refer to the
config.XML file format.