Robustel GoRugged R2000 Dual - Factory Default Settings; Login the Router

Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 24/116
Confidential
3.2 Factory Default Settings
Before configuring your router, you need to know the following default settings.
Item
Description
Username
admin
Password
admin
Eth0
DHCP
Eth1
192.168.0.1/255.255.255.0, lan0, DHCP Server Enabled.
Eth2
192.168.0.1/255.255.255.0, lan0, DHCP Server Enabled.
Eth3
192.168.0.1/255.255.255.0, lan0, DHCP Server Enabled.
Eth4
192.168.0.1/255.255.255.0, lan0, DHCP Server Enabled.
3.3 Log in the Router
1. On your PC, open a web browser such as Internet Explorer, Google and Firefox etc.
2. From your web browser, enter the IP address of the router. The default IP address of R2000 Dual Router is
192.168.0.1, though the actual address may vary.
3. In the login page, enter the username and password, choose language and then click LOGIN.
Note: If enter the wrong username or password over six times, the login web will be locked for 5 minutes.