Robustel GoRugged R2000 Dual - Interface > LAN

Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 38/116
Confidential
Click button to clear SIM1 or SIM2 monthly data traffic usage statistics. Data statistics will display only if
enable the Data Allowance function in Link Manager > Link Setting > WWAN Setting.
3.7 Interface > LAN
This section allows user to set the LAN and the related parameters.
LAN
Click to edit the configuration of the current LAN interface. Click to delete the current LAN interface.
Click to add a new LAN interface. The maximum number of LAN interface is four which include lan0, lan1, lan2
and lan3.
Lan0~lan3 is available when they were selected randomly by ETH1~ETH4 in 3.8 Interface > Ethernet section. All of
ETH1~ETH4 were default to lan0, and the default IP is 192.168.0.1/255.255.255.0.
General Settings
Item
Description
Default
Interface
Select from wan or lan0 to lan3.
Note：Lan0~lan3 is available when they were selected randomly by
ETH1~ETH4 in 3.8 Interface > Ethernet section. All of ETH1~ETH4
were default to lan0, and the default IP is
192.168.0.1/255.255.255.0.
lan0
IP Address
Set the IP Address of the LAN interface.
192.168.0.1
Netmask
Set the Netmask of the LAN interface.
255.255.255.0
MTU
Maximum Transmission Unit. It is the identifier of the maximum
size of packet, which is possible to transfer in a given environment.
1500