Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 42/116
Confidential
Status
This section shows the Ethernet port status and connected devices.
Click every row, the details status information will be display under the row. Please refer to the screenshot below.
3.8 Interface > Ethernet
R2000 Dual has four LAN Ethernet ports and one WAN Ethernet port. This section allow user to set the parameter of
all the Ethernet port.
One LAN Ethernet port should be assigned to lan0 a least. All of ETH1~ETH4 were default to lan0, and the default IP is
192.168.0.1/255.255.255.0. Please go to 3.7 Interface > LAN to configure the LAN IP.
Only ETH0 can be assigned as wan. Please go to 3.6 Interface > Link Manager to configure the WAN IP.
To Next Page
Loading...
