Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 18/116
Confidential
Two methods for mounting the router
1. Wall mounting:
Use 4 pcs of M2.5*4 flat head Phillips screws to fix the wall mounting kits to the router, and then use 2 pcs of
M3 drywall screws to mount the router associated with the wall mounting kit on the wall.
Note: Recommended torque for mounting is 0.5 N.m, and the maximum allowed is 0.7 N.m.
2. DIN rail mounting:
Use 3 pcs of M3*6 flat head Phillips screws to fix the DIN rail to the router, and then hang the DIN rail on the
bracket. It is necessary to choose the standard bracket.
Note: Recommended torque for mounting is 1.0 N.m, and the maximum allowed is 1.2 N.m.
When mounting the kit onto the DIN rail, make sure that its metal springs are orientated towards the top
of the DIN rail.
2.8 Ground the Router
Router grounding helps prevent the noise effect due to electromagnetic interference (EMI). Connect the router to the
site ground wire by the ground screw before powering on.
Note: This product is appropriate to be mounted on a sound grounded device surface, such as a metal panel.
2.9 POE Connection
R2000 Dual’s four fast Ethernet LAN ports support POE feature (Voltage range: 48 to 57V DC), which can electrify the
network terminal devices such as IP camera and other WLAN AP etc. See figure below for more details.
To Next Page
Loading...
