Robustel GoRugged R2000 Dual - Page 40

Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 39/116
Confidential
Enable DHCP function, when configure DHCP Mode as Server, the window will display as the following screenshot.
DHCP Server
Item
Description
Default
Enable
Click the switch to show “ON” and to enable DHCP function.
ON
Mode
Server: Lease IP address to DHCP clients which connect to LAN.
Relay: Router can be DHCP Relay, which will provide a relay tunnel to
solve problem that DHCP Client and DHCP Server is not in a same subnet.
DHCP
Server
IP Pool Start
Define the beginning of the pool of IP addresses which will lease to DHCP
clients.
192.168.
0.2
IP Pool End
Define the end of the pool of IP addresses which will lease to DHCP
clients.
192.168.
0.100
Subnet Mask
Define the Subnet Mask which the DHCP clients will obtain from DHCP
server.
255.255.
255.0
Gateway
Define the Gateway which the DHCP clients will obtain from DHCP server.
Null
Primary DNS
Define the Primary DNS Server which the DHCP clients will obtain from
DHCP server.
Null
Secondary DNS
Define the Secondary DNS Server which the DHCP clients will obtain from
DHCP server.
Null
WINS Server
Define the Windows Name Server which the DHCP clients will obtain
from DHCP server.
Null
Lease Time
Define the time which the client can use the IP address which obtained
from DHCP server.
120