Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 26/116
Confidential
Click to save the current configuration into router’s flash and apply the
modification on every configuration page, to make the modification
taking effect.
Click to reboot the router. If the Reboot button is yellow, it means that
some completed configurations will take effect only after reboot.
Click to exit safely, then it will switch to login page. Shut down web page
directly without logout, the next one can login web on this browser
without a password before timeout.
Click to submit the modification on current configuration page.
Click to cancel the modification on current configuration page.
Note: The steps of how to modify configuration are as bellow:
1. Modify in one page;
2. Click under this page;
3. Modify in another page;
4. Click under this page;
5. Complete all modification;
6. Click .
To Next Page
Loading...
