Robustel GoRugged R2000 Dual - Page 51

Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 50/116
Confidential
Advanced
Item
Description
Default
Max Associated Stations
Set the max number of association station to access the router AP.
64
Beacon Interval
Set the frequency of the router AP broadcast Beacon, which was used for
wireless network synchronization.
100
DTIM Interval
DTIM (Delivery Traffic Indication Message), router AP will send the
multicast traffic according to this interval.
2
RTS Threshold
Set RTS (request to send) threshold to 2347, router AP will never sent the
signal before sending out data.
Set RTS threshold to 0, router AP will send the signal once it sending out
data.
2347
Fragmentation Threshold
Set the fragmentation threshold for WiFi AP data packet.
Recommend remain at 2346.
2346
Transmit Rate
Set the transmit rate, you can choose Auto or specify a Transmit Rate.
Auto
11N Transmit Rate
Set the data transmit rate under the IEEE 802.11n WiFi mode.
Select “Auto” or a specified transmit rate.
Auto
Transmit Power
Select from “Max”, “High”, “Medium” and “Low”.
Max
Channel Width
Select from “20MHz”, “40MHz”.
40 MHz channel width provides twice the data rate available over a single
20 MHz channel.
Auto
Enable WMM
Click “ON” to enable WMM.
ON