Robustel GoRugged R2000 Dual - Page 57

Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 56/116
Confidential
Click to add filtering rules. (The maximum number of the filtering rule is twenty.
Filtering
Item
Description
Default
Enable Filtering
Enable filtering rules.
ON
Default Filtering Policy
Select from “Accept” and “Drop”.
Accept: Router will accept all the connecting requests except the hosts
which fit the filter list.
Drop: Router will only reject the connecting requests from the hosts which
fit the filter list.
accept
Enable Remote SSH
Access
Enable to allow users to access the router remotely on the internet side
via SSH.
OFF
Enable Local SSH Access
Enable to allow users to access the router on the local Ethernet via SSH.
ON
Enable Remote Telnet
Access
Enable to allow users to access the router remotely on the internet side
via Telnet.
OFF
Enable Local Telnet Access
Enable to allow users to access the router on the local Ethernet via Telnet.
ON
Enable Remote Http
Access
Enable to allow users to access the router remotely on the internet side
via Http.
OFF
Enable Local Http Access
Enable to allow users to access the router on the local Ethernet via Http.
ON
Enable Remote Https
Access
Enable to allow users to access the router remotely on the internet side
via Https.
ON
Enable Remote Ping
Respond
Enable to make router reply the Ping requests from the internet side.
ON
Enable DOS Defending
Enable to defend dos attack. Dos attack is an attempt to make a machine
or network resource unavailable to its intended users.
ON
Index
Show the index of the filtering rule or the MAC binding rule.
1
Source Address
Defines if access is allowed from one or a range of IP addresses which are
defined by Source IP Address, or every IP addresses.
Null
Source MAC
Enter the MAC address of the defined source IP address.
Null