Robustel GoRugged R2000 Dual - Page 89

Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 88/116
Confidential
Sniffer @ Tools
Item
Description
Default
Interface
Select form “all”, “wwan1”, “wwan2”, “lan0”, “lan1”, “lan2”, “lan3” and
“wlan0”.
wwan0/wwan1: available wwan0 or wwan1 had been set as Primary Link or
Backup Link.
lan0~1an3: available lan0~lan3 had been set to Ethernet port.
wlan0: available under Wi-Fi Client mode.
All
Host
Filter the packet that contain the specify IP address.
Null
Packets Request
Set the packet number that the router can sniffer at a time.
1000
Protocol
Select from “All”, “IP”, “TCP”, “UDP” and “ARP”.
All
Port
Set the port number for TCP or UDP that is used in sniffer.
Null
Status
Show the current status of sniffer.
Null
Click this button to start the sniffer.
/
Click this button to stop the sniffer. Once click the stop button, a new log file
will be displayed in the follow List.
/
Capture Files
Every times of sniffer log will be saved automatically as a new file. You can find
the file from this Sniffer Traffic Data List and click to download the log,
click to delete the log file. It can cache a maximum of 5 files.
Null