Robustel GoRugged R2000 Dual - Page 96

Robustel GoRugged R2000 Dual User Guide
RT_UG_R2000 Dual_v.1.0.5 25 April, 2017 95/116
Confidential
Go to System > Profile > Export Configuration File, select Export type as Full, click to generate the XML
file and then click to export the XML file.
XML command:
<lan>
<network max_entry_num="2">
<id>1</id>
<interface>lan0</interface>
<ip>172.16.99.11</ip>
<netmask>255.255.0.0</netmask>
<mtu>1500</mtu>
SMS cmd:
set lan network 1 interface lan0
set lan network 1 ip 172.16.99.11
set lan network 1 netmask 255.255.0.0
set lan network 1 mtu 1500
3. The semicolon character (‘;’) is used to separate more than one commands packed in a single SMS.
4. E.g.
admin:admin;status system
In this command, username is admin, password is admin, and the function of the command is getting the
system status.
SMS received:
hardware_version = 1.0
firmware_version = "1.2.0 (Rev 399)"
kernel_version = 3.10.49
device_model = R2000 Dual