45
10
26/15
2
370 x 510 x 140
3.1
3.4
Indoor electric heaters RH
They are electric resistances made of air exposed wire
elements and include the following components:
Electric resistances of the air exposed wires type with
chrome-nickel wires.
High reliability contactors with 220 V coil.
Safety thermal protector that disconnects control circuit when
sensing an abnormally high temperature.
Fan control to prevent the resistance from operating if the fan
has not been switched on.
Star-triangle connection terminal strip for 230.3.50 &
400.3.50.
Quick connector for the control wiring between the heater ans
the air conditioner.
Attention:
A flow rate control should be installed together with every
electric heater, to prevent the heater from operating if the fan
has not been switched on.
General dimensions mm
15
39/23
2
370 x 510 x 140
3.8
4.2
kW
V.ph.Hz
A
mm WG
mm
kg
kg
BCH-7,10 BCH-7,10,12,15,20 BCH-10,12,15,20
For installation in heat pump size
Power
Power supply
Consumption
Pressure with nominal flow rate
Shipping dimensions
Nett weight
Gross weight
RH - 5.1
RH - 5.3 RH - 103 RH - 15.3
Model
BCH-7
5
230.1.50
22
1
370 x 510 x 140
2.3
2.7
5
13/7.5
1
370 x 510 x 140
2.3
2.7
Characteristics
230.3.50 or 400.3.50
70
85
410
495
123
350
310